Lely Splendimo F

fLely Splendimo F


Splendimo front mowers are available in several versions and working widths of 2.40 m, 2.80 m and 3.20 m.



The choices that you make for mowing – time of mowing, with or without conditioner, regular or wide swath – have a direct impact on the further processing of fodder.  Every Splendimo front mower has the standard characteristics such as the trailed suspension, a headland ram and the unique Lely cutter bar concept.


Trailed suspension, a must for every front mower

The loading on front mowers, due to the pushing movement of the tractor, is very high. The only way to correctly compensate for that is to make sure that the mower has sufficient freedom of movement and that a trailed motion is created.


Optimum freedom of movement

All Splendimo front mowers are suspended by means of a unique parallelogram suspension system in a special headstock. This system of trailed suspension guarantees perfect contour following and gives the mower a huge amount of freedom of movement in all directions.


Obstacles – no problem!

Because the front mower has no obstacle protection just like a rear mower, it is very important that the front mower can easily shift to the rear.


Ground pressure adjustment

In the parallelogram suspension a spring is incorporated, which relieves the pressure on the ground. The spring pulls constantly on the mower and, by adjusting the lifting height, the spring is given more or less tension, which changes the ground pressure of the mower.


Easy operation on headlands

For ease of operation on headlands, parallel to the spring, a single-action lifting ram is fitted. By utilising this headland ram, the front-lifting system remains at a fixed height and you can quickly make a lot of ground clearance so that that you can easily drive over existing mown swaths. When it is coupled to the front hydraulic lifting system, the mower section is first lifted, prior to raising the tractor’s front linkage system.


Availability of various drives

Front mowers are fitted as standard with a 1,000 rpm, clockwise rotating drive system. Ex-factory, various combinations of revolutions per minute and direction of rotation are possible.



When fitted with two or three swath boards on either side, which are available as optional extras, swaths are laid down in an ideal manner for pick-up loaders. The 240 F, equipped with an extra strong protective cover and heavy-duty skids, is used as a Heavy Duty version on roadside verges. The 320 F has no swath guides and due to its wide distribution, it is very suitable for mowing and when a wide spread of grass is required.


Technical Specifications

  SPLENDIMO 240 F  260 FA 280 F 300 FS 320 F
  Working width (m) 2.40  2.60 2.80 3.00 3.20
  Weight (kg) 755  465 810 630 815
  Power reqd. (kW) 37  37 44 48 51
  Swath width (m) 1.20 – 2.15  1.00 1.40 – 2.55 1.00 2.95



Comments are closed