Celli Go Fixed Power Harrow

HP 40-80   KW 29-59

The Celli Go Fixed Power Harrow is ideal for:

  • Working with small tractors
  • Working soil in depth
  • Tilling soil in orchards and vineyards
  • Preparing seedbeds
  • Eliminating soil compacting
  • Getting the right degree of soil finishing according to specific needs

Features

Box-section welded frame
One of the most important features of Celli rotating harrows is the box frame. This construction system provides maximum torsional rigidity so that the gears inside always work in perfect conditions. Despite being an expensive solution at a construction level, Celli has always considered a rigid structure important for the machine, so that the transmission parts always work perfectly in line, even after years of use.

There is no need to apply a reinforced cross bar thanks to the welded frame. This provides an important advantage in the case of folding power harrows in which the machines operate upside down and there is no space to adjust the reinforcements. Regarding machine dismantling, people usually think that it is difficult and takes a long time. In reality, this is not the case. A minimal number of parts must be removed to access the transmission parts in Celli machines, as machine operation starts from the sides.

Do not remove the three-point hitch, gearbox or any accessories fixed to the machine frame (roller adjustment device, levelling bar, etc.). If intervention on the rotor shaft near the end of the machine is necessary, disassembly and reassembly only requires a few minutes, while the machine body must be completely opened in the case of traditional harrow machines with bolted frames.

Thick metal sheets Rotor shafts forged in one piece

Large distance between the rotor bearings
A large distance ensures perfect parallelism of the rotors, even under heavy loads.

Extra lubrication of the upper rotor bearings
The safety shields of the upper bearings limit the flow of lubricant from the lower end. It is therefore advisable to perform an extra lubrication operation from upper end.

Well spaced rotors
25 cm is the ideal distance for refining the soil well. There is no risk of clogging when the ground is wet.

Tine rotor helical phasing
The differentiated phase angles reduce vibrations during operation and limit the risk of jamming due to stones.

Gearboxes designed, manufactured and guaranteed by Celli Effective mobile side guards
Simple, robust and minimal space required.

Effective stone protector systems
Can be removed when not needed and replaced when worn out.

Robust leveling bars
They are rigid bars that allow soil leveling after processing. They are adjustable with pins or a screw, depending on the model in which they are mounted.

Quality leveling rear rollers
Available in various models and diameters, made of high quality and thick steel.

Versatility

Gear change
The replacement of a gear in the event of breakage takes about the same amount of time as it does for a machine with a traditional bolted frame.

Tine quick release system (on request for Energy models)
The quick release is a simple and reliable system, which drastically reduces blade changing times.

Gearbox oil cooling system (on request)
A gearbox oil cooling system is available for a number of models in the Celli product range. This is a particularly useful accessory when the equipment is used for long periods of time in harsh conditions. The presence of an oil filter guarantees the elimination of impurities during the breaking-in phase, which lengthens the life of bearings and gears.

Gearbox easily removable from the machine body for repairs

Hydraulic jacks with roller adjustment

Commercial aspects

Wide range of models for all power ranges

High value of used products
The welded frame is virtually non-deformable and all the alignments are guaranteed even after years of operation.

Constant availability of spare parts
Celli models constantly evolve, but an effective spare parts management system ensures that all the parts needed to keep the machines efficient are still available after many years.

Technical specifications and standard equipment

  • maximum horsepower: 80 HP (59 KW)
  • PTO: 1-Speed for 540 rpm: 319 rpm
  • swinging front hitches
  • Cat. 2 3-point hitch
  • rear levelling roller adjustment by pins
  • adjustable roller with pins
  • tines 90x10x260 mm: working depth about 26 cm
  • mobile side plates
  • drive shaft with shear bolt
  • welded safety devices

Optional accessories

  • 4-speed gearbox for 540 rpm PTO mod.200 No. of teeth 16-19 = 269 rpm; 17-18 = 301 rpm No. of teeth 18-17 = 338 rpm; 19-16 = 379 rpm mod. 175-225-250 No. of teeth 19-16 = 269 rpm; 18-17 = 301 rpm No. of teeth 17-18 = 338 rpm; 16-19 = 379 rpm
  • High PTO position gearbox
  • Drive shaft (inner/outer tubes) with clutch safety device
  • Rear rollers
  • Rear levelling bar adjustment by pins
  • Rear levelling bar adjustment by threaded bar
  • Hydraulic kit for roller adjustment
  • Front track eraser
  • Tines counter-plate kit, round rotor
  • Stone protector kit for round rotor
  • Counter-plate kit + rotor stone protector

All standard machines are supplied with low PTO position gearbox (to fit tractors with PTO height between 45 and 55 cm) except for model 250, supplied with high PTO position gearbox (to fit tractors with PTO height between 55 and 65 cm). 

Technical note The bar, provided on request, is adjusted with pins or screws. It can be set to several positions, modifying the distance from the tines and the work angle. This adjustment allows an adequate setting in all working conditions, thus minimizing power absorption.

Comments are closed