Lovol TB354E

Lovol TB354E main features

  • The fan and heater cab are optional
  • 955mm narrow tread model can better meet the operational requirements
  • U.S. ACTUANT combination instruments are optional
  • The transmission with gear combinations of 8+8, 16+8, and 12+12 has a variety of gear selections, and a reasonable velocity distribution
  • Chassis uses the four-planetary gear differential, and the power is upgraded to 60 hp
  • EC, EPA and GOST certification models are available.


Drive type4*4
Overall dimension(L * W * H)3780*1650*(2105/2495)
Wheelbase (mm)1990
Track(front/rear) regulating methodnon-adjustable /stepless
Min.Ground clearance(mm)280
Min.operating weight (with cab)(kg)2130
Min.operating weight (without cab)(kg)1940
Counterweight (max)(front/rear)72.108/300.360
Theoretical speed of each gear(forward/reverse)2.32-30.49/3.45-10.61;2.32-30.49/2.04-26.73;0.38-5/0.57-1.72;0.37-30.49/0.57-10.61;2.16-28.69/1.88-25.15
BrandJiangDong, Xinchai, Quanchai
Engine type4-cylinder
Intake modeNatural intake
Number of cylinders3
Engine rated power kW@rpm25.7
Rated speed2200
Type of air cleanerDry or wet type
Type of cooling systemForced water-cooled
Max. Torque@ revolving speed (rpm)122@1540~1650
Specific fuel consumption rate at rated conditions (g/kW.h)≤248
Fuel tank capacity (L)38
Steering brake system
Type of steering systemHydraulic/mechanical
Type of steering gearCycloid orbitrol steering gear
Type of braking systemDisc type
Transmission system
Clutch typeSingle-action/double action
Gearbox typeTwo-axis mechanical gearbox
Gearbox shift modeShift sleeve
Type of central transmissionSpiral bevel gear type
Final transmission mode (front/rear)Planetary gear type
Walking system
Frame typeFrameless
Tire Model (front/rear)7.5-16/11.2-28
Working device
Type of hydraulic suspension systemOpen-center, semi-separated type
Type of linkageThree point rear linkage
Linkage classesClass I
Lift capacity(610mm point))kN6.4
Regulating modeForce or position independent control
Type of PTO shaftRear semi-detached type
The number of PTO shaft splines6 splines/8splines
Outer diameter of PTO shaft splineφ35/φ38
PTO shaft speed540/760 or 540/1000 or 760/1000
Hydraulic system
Hydraulic output flow (L/min)23/33

Comments are closed