Lovol TB450

Lovol TB450 main features

  • The fan and heater cab are optional
  • 955mm narrow tread model can better meet the operational requirements
  • U.S. ACTUANT combination instruments are optional
  • The transmission with gear combinations of 8+8, 16+8, and 12+12 has a variety of gear selections, and a reasonable velocity distribution
  • Chassis uses the four-planetary gear differential, and the power is upgraded to 60 hp
  • EC, EPA and GOST certification models are available.


Drive type4*2
Overall dimension(L * W * H)3980*1650*(2130/2520)
Wheelbase (mm)1966
Track(front/rear) regulating methodStep/stepless
Min.Ground clearance(mm)400
Min.operating weight (with cab)(kg)2210
Min.operating weight (without cab)(kg)2030
Counterweight (max)(front/rear)108.144/300.360
Theoretical speed of each gear(forward/reverse)2.65-34.78/3.94-12.1;2.65-34.78/2.33-30.49;0.43-34.78/0.65-12.10;2.46-32.73/2.15-28.69
BrandXinchai, Quanchai
Engine type4-cylinder
Intake modeNatural intake
Number of cylinders4
Engine rated power kW@rpm33.1
Rated speed2400
Type of air cleanerDry or wet type
Type of cooling systemForced water-cooled
Max. Torque@ revolving speed (rpm)170@1600~1800
Specific fuel consumption rate at rated conditions (g/kW.h)≤248
Fuel tank capacity (L)38
Steering brake system
Type of steering systemHydraulic/mechanical
Type of steering gearCycloid orbitrol steering gear
Type of braking systemDisc type
Transmission system
Clutch typeSingle-action/double action
Gearbox typeTwo-axis mechanical gearbox
Gearbox shift modeShift sleeve
Type of central transmissionSpiral bevel gear type
Final transmission mode (front/rear)Planetary gear type
Walking system
Frame typeFrameless
Tire Model (front/rear)6.0-16/12.4-28
Working device
Type of hydraulic suspension systemOpen-center, semi-separated type
Type of linkageThree point rear linkage
Linkage classesClass II
Lift capacity(610mm point))kN8.3
Regulating modeForce or position independent control
Type of PTO shaftRear semi-detached type
The number of PTO shaft splines6 splines/8splines
Outer diameter of PTO shaft splineφ35/φ38
PTO shaft speed540/760 or 540/1000 or 760/1000
Hydraulic system
Hydraulic output flow (L/min)23/33

Comments are closed