.
.
.
.
Samasz drum mowers 1,65 m to 2,10 m have solid design and are very durable. Low power demand makes them one of the best in the Polish market as well as abroad.
Thanks to hydraulic lifting (optional equipment), the mower can be easily transported at the rear or side of the tractor.
.
Advantages:
- Genius invention of 20th century – cuts perfectly either lying grass or very high sedge – cane
- Factory set 5,8 cm cutting height, regulated by distance rings
- DLG Signum Test
- Solid and tough design
- Ideally fitted to the ground and even working height
- Safety breakaway spring regulated by deflection
- Quick and easy knife replacement
- PTO shaft in standard equipment
- Silent and stable operation.
Design of drum mower:
1. Improved sliding saucer hub – type IV – two
double – row bearings (only Z 010/2 2,10 m),
2. Regulated cutting height by means of distance ring.
.
Quick and easy knife replacement by means of mounting lever in standard equipment.
.
Rear 2-drum mowers [mini]
2-drum mowers Z064/3 [mini] are attached to municipal tractors. Shorter linkage (68 cm) and lower weight (only 250 kg) – these parameters enable attachment to smaller tractors – up to 1000 kg.
Advantages:
- Low weight and power demand
- Factory set cutting height at 5 cm, which can be adjusted by distance rings (8 mm)
- Ideally fitted to the ground and even working height
- Stone tested safety guards (EN 745)
- Z 064 – DLG Signum Test
- PTO shaft in standard equipment
- Despite small dimensions they perfectly muddles through bigger vesture
- Safety breakaway spring regulated by deflection
- Quick and easy knife replacement
- Hydraulic lifting set in optional equipment.
Rear 2-drum mowers with tine conditioner
Mowers with tine conditioners have hydraulic lifting in standard equipment, which enables transport upwards at the back or side of the tractor. Factory set working height (6 cm) has influence on grass re-growth and does not harm root unit of the grass.
Advantages of tine conditioner:
1. Accelerates drying,
2. Eliminates tedding,
3. Lower losses of forage ingredients owing to reduced handling,
4. Loose forage spread into wide swath,
5. Always even swath for baler collecting,
6. New modernized tines in V-shape made of hard-to-tear steel, placed in rubber inserts.
| Type | Z 064/3 | Z 064 | Z 010 | Z 010
H |
Z 010/1 | Z 010/1
H |
Z 010/2 | Z 010/2
H |
Z 010/4 |
|---|---|---|---|---|---|---|---|---|---|
| Working width [m/ft] | 1,35 / 4’5″ | 1,35 / 4’5″ | 1,65 / 5’5″ | 1,65 / 5’5″ | 1,85 / 6’1″ | 1,85 / 6’1″ | 2,10 / 6’11” | 2,10 / 6’11” | 2,10 / 6’11” |
| Swath width [m/ft] | 0,60 / 2′ | 0,60 / 2′ | 0,70 / 2’4″ | 0,70 / 2’4″ | 0,80 / 2’7″ | 0,80 / 2’7″ | 0,90 / 2’11” | 0,90 / 2’11” | 1,00 / 3’4″ |
| Necessary hydraulic couplers | – | – | – | 1 x single
acting |
– | 1 x single
acting |
– | 1 x single
acting |
1 x single
acting |
| Working capacity [acres/h] | ~ 1,70 | ~ 2,50 | ~ 3,70 | ~ 3,70 | ~ 5,00 | ~ 5,00 | ~ 6,20 | ~ 6,20 | ~ 6,20 |
| Number of knives [pcs.] | 4 | 4 | 6 | 6 | 6 | 6 | 8 | 8 | 8 |
| RPM | 540 | 540 | 540 | 540 | 540 | 540 | 540 | 540 | 540 |
| 3-point hitch cat. | I | I | I/II | I/II | I/II | I/II | II | II | II |
| Power demand [HP] | from 20 | from 25 | from 40 | from 40 | from 60 | from 60 | from 70 | from 70 | from 75 |
| Weight [kg/lbs] | 245 / 540 | 330 / 730 | 400 / 880 | 410 / 905 | 455 / 1005 | 460 / 1015 | 555 / 1225 | 560 / 1235 | 690 / 1520 |